HP DX2810 MT DRIVER

Please try again shortly. Grasp the cable end of the connector and pull it straight up 2. Tell me what you’re looking for and I can help find solutions. For optimal speed, the channels should be balanced so that the largest amount of memory is spread between the two channels. The Virtual Agent is currently unavailable. Reconnect the power cord and any external devices, then turn on the computer. Warranty information HP Services includes a one-year standard parts and labor warranty, pick-up or carry-in, and toll-free 7 x 24 hardware technical phone support.

Uploader: Zulugami
Date Added: 6 January 2016
File Size: 27.41 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 26363
Price: Free* [*Free Regsitration Required]

To remove a bezel blank:.

This is especially important as the pins on the socket are very fragile and any damage to them may require replacing the system board. Cable Connections System board connectors are color-coded to make it easier to find the proper connection. Intel Core 2 Duo Processors: It may be necessary to remove an expansion card to gain access to the battery. If the blank needs to be replaced at a later date, you can order a replacement blank from HP. Slide the drive in through the front of the chassis 1 until the screw holes on the drive are aligned with the screw holes on the drive cage and install the two M3 metric retainer screws 2 as shown in the illustration below.

New Drivers  HX-DU010EC DRIVER DOWNLOAD

HP Compaq dx/dx Microtower PC Product Specifications | HP® Customer Support

Intel Core 2 Duo E Processor 2. If you are inserting or removing a drive, shut down the operating system properly, turn off the computer, and unplug the power cord. Never crease or bend a SATA data cable tighter than a 30 mm 1. Terms and conditions vary by country. Processor Prepare the computer for disassembly Preparation for Disassembly. Avoid exposing a hard drive to liquids, dx281 extremes, or products that have magnetic fields such as monitors or speakers.

Solution and Diagnostic Data Collection. To install a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis so that the bottom of the bracket on the card slides into the small slot on the chassis. If you are replacing an old drive with a new drive, use the four retainer screws from the old drive to install the new drive.

The screws used in the computer are of different thread sizes and lengths; using the wrong screw in an application may damage the unit.

Without a doubt, compatibility is the most important factor in buying a memory upgrade for your laptop or computer. Remove the two retainer screws that secure the drive to the bay 1 then slide the drive forward and out of the bay 2. On the rear of the computer, a slot cover lock secures the expansion card brackets in place. Connect mtt cables to the system board, if needed.

New Drivers  CANON IPF755 DRIVER

HP is compiling your results. Thank you for your patience. Reconfigure the computer, if necessary. Installing an Internal 3.

Intel Core 2 Quad Q Processor 2. Before replacing the battery, it is important to back up the computer CMOS ph. Installing Additional Drives When installing additional drives, follow these guidelines:.

Or, view all available drivers for your product below. Is my Windows version bit or bit?

HP COMPAQ DX2810 Quickspecs

If you are removing a PCI Express x16 card, pull the retention arm on the back of the expansion socket away from the card and carefully rock the card back and forth until the connectors pull free from the socket. The expansion slots accommodate full-height or half-height expansion cards. During disassembly, label each cable as you remove it, noting its position and routing.

System Board Drive Connections Refer to the following illustration and table to identify the system board drive connectors. On-site service and warranty upgrades are also available. While handling a drive, avoid touching the connector.

Connect external cables to the installed card, if needed.